In our software, we have embedded different types of panels and inventory based on their makes and capacity. Let us see how to select the desired panels and inverters from the software.
We have several panels in the inventory that suffice to provide your choice of panel and inverter. For a roof, select fill face or any method to add panels.
Choice of the panels,
Once the roof is placed with panels, you can choose the panel from the panel properties. In general, you will have the Tata panels and if you need your own choice, say for example, Waaree solar panels, you can enter the name of make and search on the search bar available.
By this way, you can able to select from the list of panels to make your desired project.
Choosing the inverter;
Choosing the inverter is also similar to that of panels. On the left column, there is a section called components. Select components and then select Inverter Menu.
Similar to that of choosing panels, you can select the desired inverter say you need Sungrow you can type in the name and search for it.
An Inverter moves along with the cursor. Each time you click on the roof, an inverter is placed. Once you are done with placing the inverters, select the complete button on top.
The design is now complete and you can able to estimate the generate values with these choices for further insights about the selection.
By following these steps one can add the desired panel and inverter choices into their rooftop design.